VISCOSITY: 5W-30 ADVANTAGES: 100% synthetic oil. Developed with low sulfated ash content (Low SAPS), designed for EURO 5 and 6 Diesel engines, with Diesel Particulate Filter (DPF) and gasoline with catalytic converter. The PROFIVE C4 concept optimizes the operation and lifespan of post-treatment systems for greater respect for the environment. Its 5W-30 grade (low viscosity) leads to energy savings. Standards: ACEA C4 Specifications: ACEA C3 Renault RN 0720* Mercedes MB p.226.51/229.52 ACEA C4: requiring a “Low SAPS” oil (low sulfated ash content <0.5%, Phosphorus <0.09%, S <0.2%), with an HTHS viscosity >3.5 mPa.S and reaching the maximum oil change intervals determined by the manufacturer RENAULT. RENAULT RN 0720: for all RENAULT Diesel group engines with DPF as well as Laguna III 1.5 dCi without DPF and Kangoo II 1.5 dCi without DPF before June 2008. Do not use for 2.2L dCi engines with DPF (use RN 710). MB 226.51: specification equivalent to Renault RN0720, intended for "Class A" models equipped with the OM607 Diesel engine (Renault engine to which an MB code has been assigned). *Contains Hydro Cracked (HC) base oils. The characteristics are given for information purposes only and correspond to our current manufacturing standards. IGOL reserves the right to modify them to allow its customers to benefit from technical developments. Before using this product, it is advisable to consult the instructions for use and the environmental impacts contained in the technical and safety data sheets. The information given above is based on the current state of knowledge relating to the product concerned. The user of the product must take all necessary precautions relating to its use. IGOL cannot be held liable for any damage resulting from improper use of the product. PACKAGING: 5L P excluding VAT: €37.50 including VAT: €45.00
